ABC Express Blinds - You measure. You fit. You save.
Hello, Guest!
Login | Track Order

You have 0 items
in your shopping cart.

Total: $0

Aluminium Cedar Nova Roller Roman Sunscreen Vertical Padded Pelmets
Café Standard Café Premium Café Retractable Café Automatic Awnings Umbrellas

how to

How to Measure   How to Install  

All blinds come complete with their own simple step by step instructions.

Below is for the most standard blind installations.

What you will need

  1. Power drill
  2. Drill bit
  3. Phillips screwdriver (the one with the crossed head)
  4. A pencil

Which drill bit?

If you're drilling into concrete, brick or plaster you should use a 5.5mm diameter masonry drill bit. If you're drilling into wood, steel or uPVC you should use a 3mm diameter high-speed steel (HSS) drill bit.

4 Simple steps to install your blind

Step 1

Gather your tools and unpack your blind. Inside you'll find all the fixtures and fittings you'll need, as well as a more comprehensive set of instructions.

Step 2

Decide where to position the blind and mark out your drill holes. In most cases you'll only need to drill 2 holes. Usually these should be positioned about 15cm from the end of the blind. Wider blinds will need more holes drilled, but don't worry, full details will come with your blind.

Step 3

Drill your holes and then screw the brackets into place. You'll also be provided with rawl plugs, should you need to use them.

Step 4

Fit your blind into the brackets. Almost all styles of blind will just click into place, it really is that easy.

 

For more information please contact us.